FCC SODC, FCC-ID, FCC 

Such reports can be issued as long as they are approved by the FCC.

A laboratory authorized by A2LA (American Laboratory Accreditation Association) or NVLAP (National Laboratory Accreditation System) can obtain such reports and DOC announcements. Manufacturers can label the FCC logo on the product and sell it to the United States.

FCC Certification (FCC ID) Certificate

Certification method: First, the product will be sent directly to the TCB laboratory in the United States, but this will cost high and time is not well controlled. Second, send the product to the FCC-accredited laboratory for testing, preparing materials, and completing the report. The laboratory will then send the test report to the TCB for certification.

Prepared document:

To apply for FCC Verification, FCC DOC manufacturers only need to provide samples, circuit diagrams, series of differences description

Information required to apply for FCCID:

1. sample

2. Service application form, (NS provides format, completed and signed by the applicant)

3. Authorization letter

4. Technical Specification, including the following:

1. Frequency: Please indicate the frequency range, or the detailed frequency

2. Modulation: working mode, such as: FM, HFSS, DSSS, UNPS, GSM, CDMA, etc. If it is HFSS mode, write its principle

3. Antenna Specification: Products with external antennas (such as walkie-talkies) should give antenna parameters (Antenna Gain)

4. Output Power (actually measured output power has a 5% deviation from the customer's nominal allowable, otherwise Fail)

 5.Use Manual Pay attention to warnings

 6.Chematics (circuit diagram)

1. Circuit diagram: to indicate the component parameters, it must be marked with an antenna

2. Component location map

7. Lock Diagram (block diagram) Have an antenna and have a frequency 8. Circuit Description The circuit diagram/principle is described in text form.

8. Turn up procedure (how to adjust the frequency to the corresponding frequency point)