Standard test of LED lamp EN62493.

        For the eu market, the European commission stipulates that all LED lamps exported to the eu must deal with CE certification. Only the products with CE certification mark can be sold in the European market.

        Market in the eu "CE" mark is a compulsory certification mark, whether the products of the enterprises within the eu, or products of other countries, to free circulation in the eu market, must be labeled with "CE", to show that the product is in conformity with the European Union "the new methods of technical coordination and standardization" basic requirements of the directive.This is a mandatory requirement for products by eu law.

        CE certification of LED lamps: the content of standard test of EN62493.

        The CE certification of lamps and lanterns requires two tests, CE certification -EMC and ce-lvd;

        CE is different according to the product, the test standard is different;Common product standards are as follows:

        Lamp class standard is EN55015;

        EN61574 EN60598;

        Bulb lamp energy-saving lamp LVD standard is EN60968;

        The standard of household appliances is EN55014 EN60335;

        IT product standard is EN55022 EN55024 EN60950;

        AV product standard is EN55013 EN55020 EN60065;

        The rectifier standard is EN61347;

        The relevant requirements of EMF in EN62493.

        To meet this standard EMF requirements, the following requirements are met:

        The 20 kHz to 30 MHZ power Voltage Mains Terminal Disturbance Voltage

        100 kHz to 30 MHZ Electromagnetic radiation harassment Radiated Electromagnetic Disturbance

        30 MHz to 300 MHz Electromagnetic radiation harassment Radiated Electromagnetic Disturbance

        MHz induction Current Density - this EN 55015 is not required.

        Before the above three test projects with the traditional standard EN55015 test methods and limit are exactly the same, just different frequency range, combined with the product scope for standard EN62493 with EN55015 is very similar, if apply for CE/EMC and EN62493 certification, at the same time can greatly reduce the cost of certification and cycle, improve the quality of the product, the product exports to occupy advantage, avoid unnecessary economic loss, provide reference basis for develop foreign trade market, help the Chinese exporters export markets abroad smoothly!