PSE certificate of power

        A copy of the power adapter in Japan PSE login to Japanese buyers within one month after the purchase power adapter, take A copy of the PSE to METI registration filing, the Japanese economy, trade and industry (METI) of PSE login. And in the product under the PSE mark printed on the plate of Japanese importer company name. The same specifications of the products to the need to log in A Japanese importers, aging is equivalent to the original, the original general PSE certificate is valid for 7 years, under the control of power adapter belongs to DENAN class A product.

        Power adapter belongs to A kind of product, is A kind of product specific electrical products (specified products), class A must obtain A government compulsory product certification, namely T logo, the logo can only be issued by MITI the Japanese economy, trade and industry. Electrical equipment and materials designated product, must have the diamond PSE mark on the label, must be implemented by authorized evaluation unit ACAB compulsory third party validation. Manufacturers certificate of conformity to the diamond PSE label.

        Therefore, the enterprise applying for PSE certification should first select a test room authorized by Japan to obtain the test report issued by the laboratory and prove that the product meets the technical requirements of Japan.

        Japan has two sets of technical requirements for battery chargers, and customers can choose either:

        The first is a very traditional Japanese technical requirement.

        The second is the technical requirement that is consistent with IEC609502nd+A4.

        Suggest Chinese customers to choose the second, this way, because China and Japan are the IECEE CB - members, customers to CQC for CB report in China, and then turn the laboratory application to Japan CB report.If using method 1, the CB report cannot be accepted. 

        If the product is designed according to the second mode, that is, according to the IEC60950 standard, all the safety components of the primary circuit, such as capacitor and thermal release, should meet the international IEC standard.If the product is designed according to the first design, that is, according to the Japanese national standard, all the safety components of the primary circuit should meet the Japanese national standards.It is important to note that if option 1 is selected, the CB report is not accepted.It is also not allowed to mix methods 1 and 2.

        About factory inspection

        The factory will be inspected by the testing agency before issuing the certificate.After the test and factory review meet the requirements, the PSE logo and the detection mechanism will be allowed on the battery charger.It is required to carry out 100% testing of the products produced, but different product test items are different, usually high pressure test and protection ground continuity test. 

        It must be a Japanese business community registered with the Japanese government to apply for registration with METI.Specific products overseas manufacturers such as to prevent the agent cooperate with poor situation, need to change the agent problems may lead to product sales, can product test pass, and buy more "fit the same inspection book", in order to register to a new agent to METI.